Welding, inspection and QA/QC in North Holland
DEHAAS works from Menaam in Friesland throughout the Netherlands, including North Holland. North Holland has port and offshore activity around Amsterdam and IJmuiden, the maritime sector around Den Helder, and considerable machine building and food processing technology in the Zaan region and West Friesland.
- Weld inspection and QA/QC on site
- Welding coordinator to ISO 14731 on call
- WPS, WPQR and EN 1090 support
- Remote assessment without a site visit
North Holland is within one and a half to two hours of Menaam via the Afsluitdijk. Much of the work needs no site visit at all: a procedure review, an assessment of welder qualifications or a question to the Welding & Quality Assistant works perfectly well remotely.
Industry in North Holland
North Holland has port and offshore activity around Amsterdam and IJmuiden, the maritime sector around Den Helder, and considerable machine building and food processing technology in the Zaan region and West Friesland. The working area within the province includes Amsterdam, Haarlem, Alkmaar, Zaanstad and Den Helder.
That industrial profile shapes the questions that arise here. Where a steel fabricator wrestles with execution classes and the FPC system, an equipment manufacturer deals with a notified body and a machine builder with distortion and dimensional stability. DEHAAS works for all three.
Which standards matter most here
In the offshore and maritime sector, class rules and operator specifications apply; in food processing technology the focus is hygienic welding, orbital welding and surface roughness. Steel construction in the region falls under EN 1090-2.
Whichever standard governs, the question is always the same: can you demonstrate the welding complies. That calls for a procedure matched to the work, a qualification record covering the range, welders working inside their qualification and examination reported on time. See all services.
What an assignment looks like
Characteristic of this region is supply chain work: structures built by several parties and joined elsewhere. Inspection at source prevents problems only surfacing at assembly.
A typical route starts with a half hour conversation about what is at stake, followed by a review of the existing documents. That produces a concrete plan: which qualifications are needed, which documents are missing and in what order that is resolved. Execution follows after that.
On site or remote
North Holland is within one and a half to two hours of Menaam via the Afsluitdijk. Inspection during production, witnessing a test coupon or attending an audit requires presence; document review, procedure writing and advice do not.
That combination keeps cost down: travel is limited to the moments where it genuinely adds something. See remote WPS and PQR review and our approach.
Frequently asked questions
Yes. North Holland is within one and a half to two hours of Menaam via the Afsluitdijk. For inspections, audits and witnessing test coupons we attend on site; document work and advice are handled remotely.
That depends on scope and duration. DEHAAS works per assignment with a proposal agreed in advance, so you know where you stand. Request a quotation with a short description of the work.
Yes, that is one of the most requested services. You send the procedure and the underlying qualification record, we assess whether the range is correct, whether the variables are right and whether the document is usable by the welder. See remote WPS and PQR review.
Yes, across Europe and on a project basis in North America. Reporting in Dutch or English. See vendor inspection abroad.
More from the knowledge centre
Have a welding or QA/QC question?
Ask the DEHAAS Welding & Quality Assistant, have your case reviewed by a specialist, or call us directly.