Welding, inspection and QA/QC in Gelderland
DEHAAS works from Menaam in Friesland throughout the Netherlands, including Gelderland. Gelderland is large and varied: machine building and supply around Apeldoorn and Zutphen, energy technology around Arnhem, and considerable steel construction and fabrication in the Achterhoek and the Betuwe.
- Weld inspection and QA/QC on site
- Welding coordinator to ISO 14731 on call
- WPS, WPQR and EN 1090 support
- Remote assessment without a site visit
Gelderland is a two to two and a half hour drive; visits are bundled into full days. Much of the work needs no site visit at all: a procedure review, an assessment of welder qualifications or a question to the Welding & Quality Assistant works perfectly well remotely.
Industry in Gelderland
Gelderland is large and varied: machine building and supply around Apeldoorn and Zutphen, energy technology around Arnhem, and considerable steel construction and fabrication in the Achterhoek and the Betuwe. The working area within the province includes Arnhem, Nijmegen, Apeldoorn, Ede and Zutphen.
That industrial profile shapes the questions that arise here. Where a steel fabricator wrestles with execution classes and the FPC system, an equipment manufacturer deals with a notified body and a machine builder with distortion and dimensional stability. DEHAAS works for all three.
Which standards matter most here
EN 1090-2 is the most common framework here, often combined with ISO 3834-2. Energy technology and equipment manufacturing add the PED, and supply to the rail sector brings EN 15085.
Whichever standard governs, the question is always the same: can you demonstrate the welding complies. That calls for a procedure matched to the work, a qualification record covering the range, welders working inside their qualification and examination reported on time. See all services.
What an assignment looks like
In the Achterhoek we see many family businesses with real craftsmanship on the floor but a procedure book that lags behind. The gain there lies in formalising what already works well, not in extra rules.
A typical route starts with a half hour conversation about what is at stake, followed by a review of the existing documents. That produces a concrete plan: which qualifications are needed, which documents are missing and in what order that is resolved. Execution follows after that.
On site or remote
Gelderland is a two to two and a half hour drive; visits are bundled into full days. Inspection during production, witnessing a test coupon or attending an audit requires presence; document review, procedure writing and advice do not.
That combination keeps cost down: travel is limited to the moments where it genuinely adds something. See remote WPS and PQR review and our approach.
Frequently asked questions
Yes. Gelderland is a two to two and a half hour drive; visits are bundled into full days. For inspections, audits and witnessing test coupons we attend on site; document work and advice are handled remotely.
That depends on scope and duration. DEHAAS works per assignment with a proposal agreed in advance, so you know where you stand. Request a quotation with a short description of the work.
Yes, that is one of the most requested services. You send the procedure and the underlying qualification record, we assess whether the range is correct, whether the variables are right and whether the document is usable by the welder. See remote WPS and PQR review.
Yes, across Europe and on a project basis in North America. Reporting in Dutch or English. See vendor inspection abroad.
More from the knowledge centre
Have a welding or QA/QC question?
Ask the DEHAAS Welding & Quality Assistant, have your case reviewed by a specialist, or call us directly.