# Welding, inspection and QA/QC in Drenthe > DEHAAS works in Drenthe and around Assen and Emmen: weld inspection, welding coordination, WPS and WPQR, EN 1090 and ISO 3834. Source: https://dehaasprojects.com/en/coverage/drenthe-welding/ Updated on: 2026-11-04 DEHAAS works from Menaam in Friesland throughout the Netherlands, including Drenthe. Drenthe has a distinct manufacturing base around Emmen and Hoogeveen, with plastics and metal processing, machine building and supply to the agricultural sector. Gas production and its associated installation work are present as well. Drenthe is within an hour and a half of Menaam. Much of the work needs no site visit at all: a procedure review, an assessment of welder qualifications or a question to the [Welding & Quality Assistant](/en/welding-assistant/) works perfectly well remotely. - Weld inspection and QA/QC on site - Welding coordinator to ISO 14731 on call - WPS, WPQR and EN 1090 support - Remote assessment without a site visit ## Industry in Drenthe Drenthe has a distinct manufacturing base around Emmen and Hoogeveen, with plastics and metal processing, machine building and supply to the agricultural sector. Gas production and its associated installation work are present as well. The working area within the province includes Assen, Emmen, Meppel, Hoogeveen and Coevorden. That industrial profile shapes the questions that arise here. Where a steel fabricator wrestles with execution classes and the FPC system, an equipment manufacturer deals with a notified body and a machine builder with distortion and dimensional stability. DEHAAS works for all three. ## Which standards matter most here For manufacturers here ISO 3834 is the most common framework, with EN 1090 as soon as load bearing steel structures are supplied. Installation work in gas production brings the PED and piping standards into play. Whichever standard governs, the question is always the same: can you demonstrate the welding complies. That calls for a procedure matched to the work, a qualification record covering the range, welders working inside their qualification and examination reported on time. See [all services](/en/services/). ## What an assignment looks like Typical work in Drenthe: a company landing its first customer requiring EN 1090, needing an FPC system and a procedure book in short order. We guide that route from scratch to certificate. A typical route starts with a half hour conversation about what is at stake, followed by a review of the existing documents. That produces a concrete plan: which qualifications are needed, which documents are missing and in what order that is resolved. Execution follows after that. ## On site or remote Drenthe is within an hour and a half of Menaam. Inspection during production, witnessing a test coupon or attending an audit requires presence; document review, procedure writing and advice do not. That combination keeps cost down: travel is limited to the moments where it genuinely adds something. See [remote WPS and PQR review](/en/services/remote-wps-pqr-review/) and [our approach](/en/our-approach/). ## Frequently asked questions ### Does DEHAAS travel to Drenthe? Yes. Drenthe is within an hour and a half of Menaam. For inspections, audits and witnessing test coupons we attend on site; document work and advice are handled remotely. ### What does a welding inspector on site cost? That depends on scope and duration. DEHAAS works per assignment with a proposal agreed in advance, so you know where you stand. Request a [quotation](/en/quote/) with a short description of the work. ### Can I have just my WPS reviewed? Yes, that is one of the most requested services. You send the procedure and the underlying qualification record, we assess whether the range is correct, whether the variables are right and whether the document is usable by the welder. See [remote WPS and PQR review](/en/services/remote-wps-pqr-review/). ### Does DEHAAS work outside the Netherlands? Yes, across Europe and on a project basis in North America. Reporting in Dutch or English. See [vendor inspection abroad](/en/knowledge-centre/vendor-inspection-abroad/). --- DEHAAS Inspection, Manufacturing & Welding Consultancy, Rypsterdyk 2, 9036 JG Menaam. Phone 06 29 72 37 91, e-mail cdehaas@dehaasprojects.com, https://dehaasprojects.com.